Introducing our cutting-edge product:
Transformer Oil Regeneration System
Regeneration is a process in which undesirable contaminants are eliminated or reduced significantly through physical or chemical adsorption processes.
INVEX transformer oil regeneration system not only remove water, gases, and particulate contamination, but also remove chemical byproducts including acids, aldehydes, ketones, and sludge, and then restore aged oil into condition fulfilling the requirements of IEC60296 and ASTMD4378 standards.
Transformer oil regeneration consists of two main simultaneous stages:
Regeneration stage:
– Physical parameters of oil restored by filters.
– Water and gases are removed by passing through a degasification vacuum tank.
– Impurities are stripped by a bank of columns that are filled with an absorbent media.
Reactivation stage:
– Impurities are removed from the sorbent and restored to its initial state.
– Exhausted sorbent media disposed of as dry waste in a landfill.
“Our outstanding machines are engineered to redefine efficiency and reliability in maintaining crucial equipment”
Key advantages in oil regeneration for transformers and turbines:
1- Advanced Filtration System:
– Removes impurities and contaminants, ensuring optimal oil quality.
– Enhances equipment lifespan by preventing wear and tear.
2- Precision Monitoring Technology:
– Real-time monitoring for immediate detection of any anomalies.
– Proactive maintenance to prevent costly downtimes.
3- Automated Process Control:
– Streamlines the regeneration process for minimal manual intervention.
– Increases operational efficiency, saving time and resources.
4- Energy-Efficient Design:
– Eco-friendly operation with reduced energy consumption.
– Cost-effective and sustainable solution for your oil regeneration needs.
Technical Specifications of Turbine Oil Regeneration Systems:
Property | Test Method | Unit | Before regeneration | After regeneration |
Viscosity at 40 °C | ASTM D445 | csi | D5 | S 43.5 |
Viscosity at 100 °C | ASTM D445 | est | 6.5 | 6.6 |
Acidity | ASTM D974 | mg KOH/g | 0.31 | < 0.13 |
Oxidation stability | ASTM D2272 | – | 203 | > 1689 |
Level of cleanliness | NAS 1638 | Particles/ml | Out of range | 7 |
Water separability | ASTM D971 | – | – | 0/40/40 |
Varnish potential test | ASTM D 7843 | – | 28.4 | < 15 |
Foaming test | ASTM D 892 | ml/ml | – | 0.2 |
Water content | ASTM D 6304 | ppm | > 200 | 20 |
Technical Specifications of Transformer Oil Regeneration Systems:
Property | Test Method | Unit | Before regeneration | After regeneration |
Acidity | IEC 62021 | mg KOH/g | 025 | < 0.01 |
Color & Appearance | ISO 2049 | – | Brown / Cloudy | < 0.5 |
Breakdown Voltage | IEC 60156 | kV | < 30 | > 70 |
Water Content | IEC 60814 | ppm | < 2000 | 5 |
Tan & at 90 °C | IEC 60247 | – | < 0.01 | < 0.001 |
Interfacial Tension | ASTM D971 | mN/m | < 15 | > 40 |
Why Choose INVEX Transformer Oil Regeneration Machines:
Proven Results
Trusted by industry leaders for consistent and reliable oil regeneration.
Cost Savings
Reduce maintenance costs and extend the life of your equipment.
Environmental Responsibility
Our energy-efficient design aligns with eco-friendly practices.
Services
Free training for customer engineers and a lifelong service for the oil regeneration machines.
Don’t let outdated methods compromise your equipment’s efficiency. Invest in the future of oil regeneration with our advanced machines. Ensure the longevity and peak performance of your transformers and turbines.
Ready to experience the next level of oil regeneration? Contact us today for a personalized consultation and take the first step toward unmatched reliability.
